Design, installation and tech. maintenance of heating systems
An important stage in the construction of any facility, from a small production facility to a large industrial site, is the design and installation of heating systems. It is necessary to approach these processes very responsibly, trusting only qualified specialists, because the comfort of being in the premises of the object, as well as the service life of the operating system, directly depends on the correctness of their actions.
Modern heating systems are widely used in various schemes to automate their work. Design standards require the installation of devices to regulate, control, and measure heat consumption for each facility, as well as the installation of heating valves with control valves.
It is important that the design of the heating systems was carried out with due care, accompanied by calculations of long-distance distribution pipelines, steam pipelines, technological lines for maximum strength, rigidity and reliability of structures excluding the likelihood of any mistakes and shortcomings in the project to prevent emergencies in the future.
Design stages
To design heat supply systems, you need:
• Topographic plan, detailed design of the object
• Technical conditions for connection to external engineering communications
• Data on heated areas, features of wall and floor structures, the number of windows, etc.
After receiving the mentioned information, a technical task is formed, a formation process is carried out, during which the following problems are solved:
• Heat engineering calculation is performed
• Heating equipment is selected
• A heat pipeline and piping of the heat supply system is planned
After completion of work on the project, the customer receives a number of technical and estimate documentation, which is a set of drawings and an explanatory note containing, as a rule, the following sections:
• Schematic diagram of the heating system;
• Characteristics of the required number of related tools and consumables for the organization;
• Statements and estimates.
Our quality design ensures uninterrupted operation of heating networks even during periods of maximum load, regardless of weather conditions.
Installation of heat supply systems
In case the facility is not supplied with heat or the supply of the cooler is poor, it is carried out with large losses, it is necessary to check the heating system. All defects in the installation of the heat supply system become noticeable only when the system starts operating in the operating mode. Defects are most often detected at the most inopportune moment, in winter, when the network load is at its maximum, and any accident causes the heat to stop flowing to the living quarters. Due to such factors, the installation of the heating system should be carried out not only diligently, but also with high-quality inspections, which allow to identify the defects of the system even before the start of operation in the maximum mode. This also applies to those cases when the reconstruction of heat supply systems is carried out. At the end of the construction and installation work, the heat pipes are subjected to final tests for strength and durability. After that the object is handed over for exploitation.
Heating system maintenance
Any equipment requires constant maintenance. In order for the heating systems to remain operational, service is used, you just need to call us or leave a request on the website.
In order to increase the service life and efficiency of centralized and autonomous hot water heating systems, they must regularly go through a series of procedures.
The Maintenance of the heating system includes its operation and malfunction control such as:
• Testing of system components
• Adjustment of the heating system operation
• Establishment of electrical components
• Chimney draft control check
• Adjustment of system safety devices
• Checking the piping connection
• Detailed inspection of the most critical elements of the system (pumps, main shut-off valves, instrumentation, automatic devices)
•Removing air from heating systems through an air collector or air outlet taps on heaters when the pressure in the supply pipeline drops below the static pressure level of this system, as well as after its adjustment
• Control over the temperature and pressure of the coolant;
• control and maintenance of thermal conditions in buildings
• check for heating of heaters with regulation
• service of shut-off and control valves
• flushing mud collectors
• preparation for seasonal operation
• elimination of all visible water leaks
• repair or replacement of faulty taps on heating devices, elimination of air jams
And it is also necessary to remember about the changing heating systems. The chemical change escapes the deposition and collision of various element systems. Complete daily actions are used to verify the probability of emergency situations and full access to the boiler room and you can always be calm about your system as well. All this will be done for you, to create convenience and comfort in your building.